How to Empty an Intex Pool in 2024: Expert Tips!

To empty an Intex pool, first, you need to connect a garden hose to the pool’s drain valve and place the other end in a suitable drainage area. Open the drain valve to let the water flow out.

How to Empty an Intex Pool

Read our How to Empty an Intex Pool carefully.

Preparation

Before you start emptying your Intex pool, it’s important to make sure you have everything you need and create a clear area around the pool. This will ensure a smooth and hassle-free process. Follow these steps of How to Empty an Intex Pool to prepare yourself and the surrounding area before emptying your pool.

Gathering The Necessary Equipment

Collecting the right equipment is crucial for successfully emptying your Intex pool. You will need:

  • A submersible pump (such as a sump pump)
  • A garden hose
  • A pool cover (optional but recommended)
  • Buckets or containers

Having these items at your disposal will make the pool draining process much more efficient.

Clearing The Surrounding Area

Clearing the area around your Intex pool before emptying is essential to prevent any unwanted debris from clogging the drain. Remove any furniture, toys, or plants in close proximity to the pool. Additionally, trim any overhanging branches that could potentially impede the draining process.

Not only will clearing the surrounding area ensure a smoother and faster drainage, but it will also help in avoiding any damage to your equipment or pool during the process. Take the time to check the area and remove any potential hazards.

Remember, proper preparation is key to a hassle-free pool draining experience. By gathering the necessary equipment and clearing the surrounding area, you’ll be well on your way to emptying your Intex pool without any complications.

Draining The Pool

How to Empty an Intex Pool with hose

Draining an Intex pool is a crucial step of How to Empty an Intex Pool in pool maintenance and cleaning. Whether you need to drain the pool for cleaning, repairs, or winterization, it’s essential to know the right methods to ensure a smooth and hassle-free process. In this section, we will explore two popular and effective ways of How to Empty an Intex Pool: using a pump and hose, and using a siphon.

Using A Pump And Hose

If you have access to a pump and hose, draining your Intex pool becomes a breeze. Here’s a step-by-step guide on How to Empty an Intex Pool:

  1. Start by turning off the pool’s filtration system and disconnecting it from the power source.
  2. Locate the drain plug at the bottom of the pool. This is usually situated near the side wall.
  3. Attach one end of the hose securely to the drain plug, ensuring a tight connection.
  4. Place the other end of the hose in an area where the water can safely drain, such as a gutter or sewer drain.
  5. Turn on the pump, allowing it to extract the water from the pool and through the hose.
  6. Monitor the draining process regularly. If the hose becomes clogged or the flow slows down, check for any blockages and clear them to continue the draining.
  7. Once the pool is empty, turn off the pump, and detach the hose from the drain plug.

Using a pump and hose provides an efficient and controlled drainage method, ensuring that you can quickly empty your Intex pool without any hassle.

Using A Siphon

If you don’t have access to a pump and hose, don’t worry; you can still drain your Intex pool using a siphon. Here’s how:

  1. Begin by submerging one end of a garden hose into the pool water, ensuring it is completely filled with water.
  2. Once the hose is filled, cover the open end with your thumb to prevent the water from escaping.
  3. Quickly move the covered end of the hose to a lower elevation than the pool level, such as the ground.
  4. Release your thumb from the hose’s open end and let gravity do its work.
  5. Water will start flowing through the hose and into the lower area, creating a siphon effect that will continue until the pool is empty.
  6. Monitor the siphoning process, adjusting the position of the hose or elevation as needed to ensure a continuous flow.

The siphoning method may take a bit longer compared to using a pump and hose, but it is still an effective way to drain your Intex pool when other options are unavailable.

If you want to know How to Drain Intex Pool With Hose in details, then you can read our this article.

Cleaning And Storing

To empty an Intex pool, start by using a pump to drain the water, then clean the pool thoroughly using a pool brush and mild detergent. Once it’s clean, allow it to dry completely before folding and storing it in a dry and protected area.

Removing Debris And Cleaning The Pool

Before storing your Intex pool, it is important to remove any debris and clean the pool thoroughly. This will ensure that the pool stays in great condition for the next season. Follow the steps below of How to Empty an Intex Pool to effectively remove debris and clean your Intex pool:

  1. Start by draining the pool completely. Use a hose or a pump to empty the pool of all water. Make sure the drain plug is removed and allow the water to flow out.
  2. Once the pool is empty, use a pool skimmer or a net to remove any leaves, insects, or other debris that may have accumulated in the pool. This will prevent them from decomposing and causing any damage to the pool.
  3. Next, use a pool brush or a soft-bristled brush to scrub the pool walls and floor. This will help remove any dirt or algae that may have stuck to the surface. Start from the top and work your way down, ensuring that you reach all areas of the pool.
  4. Rinse the pool thoroughly with clean water. This will wash away any remaining dirt or cleaning solutions that were used. Make sure to drain the rinsed water completely before proceeding to the next step.

Drying And Storing The Pool Accessories

Properly drying and storing your Intex pool accessories is crucial to prevent damage and ensure their longevity. Follow these steps to effectively dry and store your Intex pool accessories:

  1. Remove all accessories from the pool, including the ladder, pool cover, and filtration unit. Place them on a clean and dry surface.
  2. Use a dry towel or cloth to wipe down each accessory, removing any moisture. This will prevent the growth of mold or mildew.
  3. If the accessories are made of metal, apply a thin layer of lubricant to prevent rust and corrosion. Ensure that all surfaces are coated evenly.
  4. Store the accessories in a dry and secure location. Consider using plastic storage bins or bags to keep them protected from dust and moisture.
How to Efficiently Empty an Intex Pool: Expert Tips!

Credit: www.thespruce.com

Frequently Asked Questions For How To Empty An Intex Pool

How Do I Empty My Intex Pool?

To empty your Intex pool, follow these steps: 1. Turn off the pool pump and disconnect it from the power source. 2. Attach a garden hose to the drain valve on the pool. 3. Open the valve and let the water flow out into a proper drainage area. 4. Monitor the process to ensure complete drainage. 5. Once the pool is empty, close the drain valve and detach the hose.

How Do I Drain My Intex Pool Without The Adapter?

To drain your Intex pool without the adapter, follow these steps: 1. Attach a garden hose to the pool’s drain plug. 2. Position the other end of the hose in a safe drainage area. 3. Open the drain plug and let the water flow out through the hose. 4. Monitor the drainage process until the pool is empty. 5. Remember to turn off the pool pump before draining.

How Do You Completely Drain An Above Ground Pool?

To completely drain an above ground pool, locate the drain plug, remove it, and let the water drain out completely. Make sure to use a hose to direct the water away from the pool area.

How Do I Empty The Remaining Water In My Pool?

To empty the remaining water in your pool, follow these steps: 1) Turn off the pool’s filtration system. 2) Connect a drain hose to your pool’s waste outlet. 3) Open the waste valve and let the water drain out. 4) Monitor the draining process and ensure it is going to a suitable location. 5) Once the water level is sufficiently low, close the waste valve.

Conclusion

In conclusion of How to Empty an Intex Pool, Emptying an Intex pool is a straightforward process that can be done efficiently with the right steps. By following the guidelines mentioned in this post, you can ensure a quick and hassle-free pool draining experience. Remember to adhere to safety precautions, use the appropriate tools, and properly dispose of the water.

By doing so, you can maintain the longevity of your Intex pool and enjoy crystal-clear, refreshing swims for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top